4″ x 2″ x 1/4″ Seamless Satin Wheel
Unique, seamless structure for de-polishing and matte finishing without harsh and visible transition lines, sometimes seen with traditional flap brushes. Used with die grinders on flat or slightly contoured parts.
4″ x 2″ x 1/4″ Seamless Satin Wheel
Unique, seamless structure for de-polishing and matte finishing without harsh and visible transition lines, sometimes seen with traditional flap brushes. Used with die grinders on flat or slightly contoured parts.
4″ x 2″ x 1/4″ Seamless Satin Wheel
Unique, seamless structure for de-polishing and matte finishing without harsh and visible transition lines, sometimes seen with traditional flap brushes. Used with die grinders on flat or slightly contoured parts.
4″ x 2″ x 1/4″ Seamless Satin Wheel
Unique, seamless structure for de-polishing and matte finishing without harsh and visible transition lines, sometimes seen with traditional flap brushes. Used with die grinders on flat or slightly contoured parts.
1″ x 1/8″ x 1/8″ Unitized Wheel
Reach small and intricate areas to safely deburr, clean or polish without damaging parts. Compressed nonwoven material will conform to contours and acute angles and not alter part geometry.
3″ x 2″ x 1/4″ Mounted Flap Brush
Easily access smaller diameters or tight contours with handheld die grinders or flex shaft tools. Optimal for cleaning or micro-deburring inner or outer tube, pipe or fitting.
3″ x 2″ x 1/4″ Mounted Flap Brush
Easily access smaller diameters or tight contours with handheld die grinders or flex shaft tools. Optimal for cleaning or micro-deburring inner or outer tube, pipe or fitting.
2″ x 1″ x 1/4″ Mounted Flap Brush
Easily access smaller diameters or tight contours with handheld die grinders or flex shaft tools. Optimal for cleaning or micro-deburring inner or outer tube, pipe or fitting.
2″ x 1″ x 1/4″ Mounted Flap Brush
Easily access smaller diameters or tight contours with handheld die grinders or flex shaft tools. Optimal for cleaning or micro-deburring inner or outer tube, pipe or fitting.
2″ x 1″ x 1/4″ Mounted Flap Brush
Easily access smaller diameters or tight contours with handheld die grinders or flex shaft tools. Optimal for cleaning or micro-deburring inner or outer tube, pipe or fitting.
1620 Fieldstone Way, Vandalia, Ohio 45377
Call: (800) 235-9123 | Fax: (800) 841-3441